======= MB RTC =======

I started doing the MBClock for no reason but for fun,
but i think it can lead to interesting usage, such as domotic.

First, i used a DS1307 I2C Clock 
{{http://www.platan.ru/img_first/830.jpg}}

well, more exactly, this dev board : (USD $6.90)

{{http://www.futurlec.com/Pictures/ET-MINI_DS1307.jpg}}

http://www.futurlec.com/Mini_DS1307.shtml



This board hold a battery back-up, enabling the time to be maintained even with power disconnected from the board. 
The DS1307 IC stores time values in separate registers, for years, month, day, hour, minutes and seconds.
I suggest to use this board, as it's cheap, it will save you time on building, and debuging :)

===== Connection to core =====
Well, that's pretty easy : connect Gnd,Vcc,Sc,Sd to Core J4. (instead of bankstick)

I did not add a pull up resistor between Vcc and Sc (well, in fact i did, but i didnt notice any difference)






===== The C Program =====
<code>
void GET_TIME(void){

	MIOS_IIC_Start();
	MIOS_IIC_ByteSend(0xd0); // slave address, WRITE
	MIOS_IIC_ByteSend(0x00); // set address pointer to 0
	MIOS_IIC_Stop();//???

	MIOS_IIC_Start();    // start IIC
	MIOS_IIC_ByteSend(0xD1);  // send address - READ
	b0 = MIOS_IIC_ByteReceive();  // read byte
	MIOS_IIC_AckSend();    // send acknowledge
	b1 = MIOS_IIC_ByteReceive();  // read byte
	MIOS_IIC_AckSend();    // send acknowledge
	b2 = MIOS_IIC_ByteReceive();  // read byte

	MIOS_IIC_AckSend();    // send acknowledge
	b3 = MIOS_IIC_ByteReceive();  // read byte
	MIOS_IIC_AckSend();    // send acknowledge
	b4 = MIOS_IIC_ByteReceive();  // read byte
	MIOS_IIC_AckSend();    // send acknowledge
	b5 = MIOS_IIC_ByteReceive();  // read byte
	MIOS_IIC_AckSend();    // send acknowledge
	b6 = MIOS_IIC_ByteReceive();  // read byte

	MIOS_IIC_NakSend();    // send disacknowledge!!! (end the read)
	MIOS_IIC_Stop();    // stop IIC 
}</code>

==== Demo ====

{{youtube>small:lKZ12pmeBDA}}



===== Just for fun =====

I have added a 7Seg led display to show the time in that format "HH:MM:SS:ms"

To keep it simple and documented, i used the Midimon MTC Extension as is.

http://ucapps.de/midimon/mtc_extension.pdf
